Challenge

110XL-025 manufactured by Challenge has an application range which extends from minimum drives (computer printers) to heavy-duty machinery (oil pumps, etc). With a length of 11 inches, 1/4″ width and a 0.2″ pitch, these IMPERIAL TIMING BELTS belts offers a maintenance-free and economical alternative to conventional drives such as chains and gears.s. If you require …

This 13 teeth 3/8″ sprocket with a Pilot Bore of 10 mm is manufactured by Challenge in C45 steel. . This Simplex sprocket fits chain 3/8” x 7/32” and has a part number 3SR13 and is available from stock. If you require additional information please contact Sales on 01952 676926.

This 8 teeth 5/8″ sprocket with a Pilot Bore of 10 mm is manufactured by Challenge in C45 steel. . This Simplex sprocket fits chain 5/8” x 3/8” and has a part number 5SR08 and is available from stock. If you require additional information please contact Sales on 01952 676926.

This 13 teeth 8mm sprocket with a Pilot Bore of 8 mm is manufactured by Challenge in C45 steel. . This Simplex sprocket fits chain 8mm x 3mm and has a part number PB105B/13 and is available from stock. If you require additional information please contact Sales on 01952 676926.

Challenge Imperial Timing Belts for industrial use where Part numbers are identified by a 3 or 4 digit number (e.g. 12 inches ) which represents the pitch length, 1 or 2 letters which signify the belts pitch (e.g. 0.2″) and a 2 or 3 digit number (e.g. 1/4″) the belts width giving the part number …

Challenge Imperial Timing Belts for industrial use where Part numbers are identified by a 3 or 4 digit number (e.g. 8 inches ) which represents the pitch length, 1 or 2 letters which signify the belts pitch (e.g. 0.2″) and a 2 or 3 digit number (e.g. 3/8″) the belts width giving the part number …

This 14 teeth 3/8″ sprocket with a Pilot Bore of 10 mm is manufactured by Challenge in C45 steel. . This Simplex sprocket fits chain 3/8” x 7/32” and has a part number 3SR14 and is available from stock. If you require additional information please contact Sales on 01952 676926.

V-Belts for industrial use are designated both to RMA standard Z15-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 10x381Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …