Loading Results...
Z15-1/2-CHALL | Classical V Belts
Challenge Z15-1/2-CHALL Classical V Belts can be used on all types of industrial equipment. With an inside length of 15.5 inches (393.7mm) and a Z section, these Classic Classical V Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …
130XL-025 | Challenge IMPERIAL TIMING BELTS
Challenge IMPERIAL TIMING BELTS have a design that contributes to their ability to absorb shock loads and reduced interference during meshing. The 130XL-025 timing belt other benefits include a reduction in transmission noise, an increase in tooth jump resistance, power transmitted and a resistance to tooth shear. If you require additional information please contact Sales …
Z15.7 | Classical V Belts
Z15.7 Classical V Belts manufactured by Challenge can be used on all types of industrial equipment. With an inside length of 15.7 inches (400.05mm) and a Z section, these Classic Classical V Belts are particularly suitable for centrifugal pumps, compressors, tool machines, generators, high power mills and stone mills and offer a good balance between …
4SR10 | Challenge BS Sprocket
This 10 teeth 1/2″ sprocket with a Pilot Bore of 10 mm is manufactured by Challenge in C45 steel. . This Simplex sprocket fits chain 1/2” x 5/16” and has a part number 4SR10 and is available from stock. If you require additional information please contact Sales on 01952 676926.
PB105B/14 | Challenge BS Sprocket
This 14 teeth 8mm sprocket with a Pilot Bore of 8 mm is manufactured by Challenge in C45 steel. . This Simplex sprocket fits chain 8mm x 3mm and has a part number PB105B/14 and is available from stock. If you require additional information please contact Sales on 01952 676926.
3SR15 | Challenge BS Sprocket
This 15 teeth 3/8″ sprocket with a Pilot Bore of 10 mm is manufactured by Challenge in C45 steel. . This Simplex sprocket fits chain 3/8” x 7/32” and has a part number 3SR15 and is available from stock. If you require additional information please contact Sales on 01952 676926.
Z16.7 | Classical V Belts
V-Belts for industrial use are designated both to RMA standard Z16.7 where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 10×425.196Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …
90XL-037 | Challenge IMPERIAL TIMING BELTS
Challenge IMPERIAL TIMING BELTS have a design that contributes to their ability to absorb shock loads and reduced interference during meshing. The 90XL-037 timing belt other benefits include a reduction in transmission noise, an increase in tooth jump resistance, power transmitted and a resistance to tooth shear. If you require additional information please contact Sales …
PB105B/15 | Challenge BS Sprocket
This 15 teeth 8mm sprocket with a Pilot Bore of 8 mm is manufactured by Challenge in C45 steel. . This Simplex sprocket fits chain 8mm x 3mm and has a part number PB105B/15 and is available from stock. If you require additional information please contact Sales on 01952 676926.
