Product Filter

Classical CRE V-Belts.

  • List View
  • Grid View

Loading Results...

Outside Length (mm)

Pitch Length (mm)

Inside Length (mm)

Top Width (mm)

Depth (mm)

Temperature Range

AX16-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX16-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13×406.4Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require

  • Outside Length (mm): 457
  • Pitch Length (mm): 437
  • Inside Length (mm): 406
  • Top Width (mm): 13
  • Depth (mm): 8
  • Temperature Range: '-30˚C to +80˚C

£ 2.72(ex VAT)

AX18-CHALL | Classical CRE V-Belts

Challenge AX18-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 18 inches (457.2mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please

  • Outside Length (mm): 508
  • Pitch Length (mm): 488
  • Inside Length (mm): 457
  • Top Width (mm): 13
  • Depth (mm): 8
  • Temperature Range: '-30˚C to +80˚C

£ 2.80(ex VAT)

AX19-CHALL | Classical CRE V-Belts

AX19-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 19 inches (482.6mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They

  • Outside Length (mm): 533
  • Pitch Length (mm): 513
  • Inside Length (mm): 483
  • Top Width (mm): 13
  • Depth (mm): 8
  • Temperature Range: '-30˚C to +80˚C

£ 3.00(ex VAT)

AX20-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX20-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x508Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require

  • Outside Length (mm): 559
  • Pitch Length (mm): 538
  • Inside Length (mm): 508
  • Top Width (mm): 13
  • Depth (mm): 8
  • Temperature Range: '-30˚C to +80˚C

£ 3.08(ex VAT)

AX21-CHALL | Classical CRE V-Belts

Challenge AX21-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 21 inches (533.4mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please

  • Outside Length (mm): 584
  • Pitch Length (mm): 564
  • Inside Length (mm): 533
  • Top Width (mm): 13
  • Depth (mm): 8
  • Temperature Range: '-30˚C to +80˚C

£ 3.32(ex VAT)

AX22-CHALL | Classical CRE V-Belts

AX22-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 22 inches (559mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They

  • Outside Length (mm): 609
  • Pitch Length (mm): 589
  • Inside Length (mm): 559
  • Top Width (mm): 13
  • Depth (mm): 8
  • Temperature Range: '-30˚C to +80˚C

£ 3.36(ex VAT)

AX23-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX23-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x584Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require

  • Outside Length (mm): 634
  • Pitch Length (mm): 614
  • Inside Length (mm): 584
  • Top Width (mm): 13
  • Depth (mm): 8
  • Temperature Range: '-30˚C to +80˚C

£ 3.56(ex VAT)

AX32-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX32-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x813Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require

  • Outside Length (mm): 863
  • Pitch Length (mm): 843
  • Inside Length (mm): 813
  • Top Width (mm): 13
  • Depth (mm): 8
  • Temperature Range: '-30˚C to +80˚C

£ 3.66(ex VAT)

AX24-CHALL | Classical CRE V-Belts

Challenge AX24-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 24 inches (610mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please

  • Outside Length (mm): 660
  • Pitch Length (mm): 640
  • Inside Length (mm): 610
  • Top Width (mm): 13
  • Depth (mm): 8
  • Temperature Range: '-30˚C to +80˚C

£ 3.72(ex VAT)

AX33-CHALL | Classical CRE V-Belts

Challenge AX33-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 33 inches (838mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please

  • Outside Length (mm): 888
  • Pitch Length (mm): 868
  • Inside Length (mm): 838
  • Top Width (mm): 13
  • Depth (mm): 8
  • Temperature Range: '-30˚C to +80˚C

£ 3.75(ex VAT)

1 2 3 16