Classical CRE V-Belts

Loading Results...

AX82-CHALL | Classical CRE V-Belts

AX82-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 82 inches (2083mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 2133
Pitch Length (mm): 2113
Inside Length (mm): 2083
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 7.90(ex VAT)

BX51-CHALL | Classical CRE V-Belts

BX51-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 51 inches (1295mm) and a BX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1365
Pitch Length (mm): 1335
Inside Length (mm): 1295
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 8.01(ex VAT)

AX83-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX83-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x2108Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 2158
Pitch Length (mm): 2138
Inside Length (mm): 2108
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 8.01(ex VAT)

AX84-CHALL | Classical CRE V-Belts

Challenge AX84-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 84 inches (2134mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 2184
Pitch Length (mm): 2164
Inside Length (mm): 2134
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 8.09(ex VAT)

BX52-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard BX52-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 17x1321Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1391
Pitch Length (mm): 1361
Inside Length (mm): 1321
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 8.19(ex VAT)

AX85-CHALL | Classical CRE V-Belts

AX85-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 85 inches (2159mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 2209
Pitch Length (mm): 2189
Inside Length (mm): 2159
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 8.19(ex VAT)

AX86-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX86-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x2184Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 2234
Pitch Length (mm): 2214
Inside Length (mm): 2184
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 8.27(ex VAT)

BX53-CHALL | Classical CRE V-Belts

Challenge BX53-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 53 inches (1346mm) and a BX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1416
Pitch Length (mm): 1386
Inside Length (mm): 1346
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 8.32(ex VAT)

AX87-CHALL | Classical CRE V-Belts

Challenge AX87-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 87 inches (2210mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 2260
Pitch Length (mm): 2240
Inside Length (mm): 2210
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 8.37(ex VAT)

BX54-CHALL | Classical CRE V-Belts

BX54-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 54 inches (1372mm) and a BX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1442
Pitch Length (mm): 1412
Inside Length (mm): 1372
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 8.42(ex VAT)