Classical CRE V-Belts

Loading Results...

AX88-CHALL | Classical CRE V-Belts

AX88-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 88 inches (2235mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 2285
Pitch Length (mm): 2265
Inside Length (mm): 2235
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 8.48(ex VAT)

BX55-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard BX55-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 17x1397Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1467
Pitch Length (mm): 1437
Inside Length (mm): 1397
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 8.61(ex VAT)

AX89-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX89-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x2261Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 2311
Pitch Length (mm): 2291
Inside Length (mm): 2261
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 8.61(ex VAT)

AX90-CHALL | Classical CRE V-Belts

Challenge AX90-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 90 inches (2286mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 2336
Pitch Length (mm): 2316
Inside Length (mm): 2286
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 8.66(ex VAT)

BX56-CHALL | Classical CRE V-Belts

Challenge BX56-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 56 inches (1422mm) and a BX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1492
Pitch Length (mm): 1462
Inside Length (mm): 1422
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 8.79(ex VAT)

AX91-CHALL | Classical CRE V-Belts

AX91-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 91 inches (2311mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 2361
Pitch Length (mm): 2341
Inside Length (mm): 2311
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 8.79(ex VAT)

AX92-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX92-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x2337Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 2387
Pitch Length (mm): 2367
Inside Length (mm): 2337
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 8.84(ex VAT)

BX57-CHALL | Classical CRE V-Belts

BX57-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 57 inches (1448mm) and a BX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1518
Pitch Length (mm): 1488
Inside Length (mm): 1448
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 8.92(ex VAT)

AX93-CHALL | Classical CRE V-Belts

Challenge AX93-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 93 inches (2362mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 2412
Pitch Length (mm): 2392
Inside Length (mm): 2362
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 8.97(ex VAT)

AX94-CHALL | Classical CRE V-Belts

AX94-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 94 inches (2388mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 2438
Pitch Length (mm): 2418
Inside Length (mm): 2388
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 9.02(ex VAT)