Classical CRE V-Belts

Loading Results...

AX44-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX44-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1118Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1168
Pitch Length (mm): 1148
Inside Length (mm): 1118
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 4.95(ex VAT)

AX45-CHALL | Classical CRE V-Belts

Challenge AX45-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 45 inches (1143mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1193
Pitch Length (mm): 1173
Inside Length (mm): 1143
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 5.10(ex VAT)

AX46-CHALL | Classical CRE V-Belts

AX46-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 46 inches (1168mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1218
Pitch Length (mm): 1198
Inside Length (mm): 1168
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 5.16(ex VAT)

BX28-CHALL | Classical CRE V-Belts

Challenge BX28-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 28 inches (711mm) and a BX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 781
Pitch Length (mm): 751
Inside Length (mm): 711
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 5.16(ex VAT)

AX47-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX47-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1194Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1244
Pitch Length (mm): 1224
Inside Length (mm): 1194
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 5.31(ex VAT)

AX48-CHALL | Classical CRE V-Belts

Challenge AX48-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 48 inches (1219mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1269
Pitch Length (mm): 1249
Inside Length (mm): 1219
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 5.37(ex VAT)

AX49-CHALL | Classical CRE V-Belts

AX49-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 49 inches (1245mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1295
Pitch Length (mm): 1275
Inside Length (mm): 1245
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 5.52(ex VAT)

BX30-CHALL | Classical CRE V-Belts

BX30-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 30 inches (762mm) and a BX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 832
Pitch Length (mm): 802
Inside Length (mm): 762
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 5.58(ex VAT)

AX50-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX50-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1270Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1320
Pitch Length (mm): 1300
Inside Length (mm): 1270
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 5.64(ex VAT)

BX31-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard BX31-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 17x787Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 857
Pitch Length (mm): 827
Inside Length (mm): 787
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 5.73(ex VAT)