Classical CRE V-Belts

Loading Results...

AX51-CHALL | Classical CRE V-Belts

Challenge AX51-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 51 inches (1295mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1345
Pitch Length (mm): 1325
Inside Length (mm): 1295
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 5.73(ex VAT)

AX52-CHALL | Classical CRE V-Belts

AX52-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 52 inches (1321mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1371
Pitch Length (mm): 1351
Inside Length (mm): 1321
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 5.85(ex VAT)

BX32-CHALL | Classical CRE V-Belts

Challenge BX32-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 32 inches (813mm) and a BX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 883
Pitch Length (mm): 853
Inside Length (mm): 813
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 5.97(ex VAT)

AX53-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX53-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1346Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1396
Pitch Length (mm): 1376
Inside Length (mm): 1346
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 5.97(ex VAT)

AX54-CHALL | Classical CRE V-Belts

Challenge AX54-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 54 inches (1372mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1422
Pitch Length (mm): 1402
Inside Length (mm): 1372
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.06(ex VAT)

BX33-CHALL | Classical CRE V-Belts

BX33-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 33 inches (838mm) and a BX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 908
Pitch Length (mm): 878
Inside Length (mm): 838
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.09(ex VAT)

AX55-CHALL | Classical CRE V-Belts

AX55-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 55 inches (1397mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1447
Pitch Length (mm): 1427
Inside Length (mm): 1397
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.18(ex VAT)

BX34-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard BX34-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 17x864Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 934
Pitch Length (mm): 904
Inside Length (mm): 864
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.27(ex VAT)

AX56-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX56-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1422Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1472
Pitch Length (mm): 1452
Inside Length (mm): 1422
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.27(ex VAT)

AX65-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX65-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1651Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1701
Pitch Length (mm): 1681
Inside Length (mm): 1651
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.32(ex VAT)