Classical CRE V-Belts

Loading Results...

BX40-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard BX40-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 17x1016Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1086
Pitch Length (mm): 1056
Inside Length (mm): 1016
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.32(ex VAT)

AX66-CHALL | Classical CRE V-Belts

Challenge AX66-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 66 inches (1676mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1726
Pitch Length (mm): 1706
Inside Length (mm): 1676
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.37(ex VAT)

AX57-CHALL | Classical CRE V-Belts

Challenge AX57-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 57 inches (1448mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1498
Pitch Length (mm): 1478
Inside Length (mm): 1448
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.39(ex VAT)

BX35-CHALL | Classical CRE V-Belts

Challenge BX35-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 35 inches (889mm) and a BX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 959
Pitch Length (mm): 929
Inside Length (mm): 889
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.45(ex VAT)

BX41-CHALL | Classical CRE V-Belts

Challenge BX41-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 41 inches (1041mm) and a BX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1111
Pitch Length (mm): 1081
Inside Length (mm): 1041
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.47(ex VAT)

AX58-CHALL | Classical CRE V-Belts

AX58-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 58 inches (1473mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1523
Pitch Length (mm): 1503
Inside Length (mm): 1473
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.48(ex VAT)

AX67-CHALL | Classical CRE V-Belts

AX67-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 67 inches (1702mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1752
Pitch Length (mm): 1732
Inside Length (mm): 1702
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.50(ex VAT)

AX68-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX68-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1727Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1777
Pitch Length (mm): 1757
Inside Length (mm): 1727
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.55(ex VAT)

BX36-CHALL | Classical CRE V-Belts

BX36-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 36 inches (914mm) and a BX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 984
Pitch Length (mm): 954
Inside Length (mm): 914
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.60(ex VAT)

AX59-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX59-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1499Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1549
Pitch Length (mm): 1529
Inside Length (mm): 1499
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.60(ex VAT)