Classical CRE V-Belts

Loading Results...

BX42-CHALL | Classical CRE V-Belts

BX42-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 42 inches (1067mm) and a BX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1137
Pitch Length (mm): 1107
Inside Length (mm): 1067
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.66(ex VAT)

AX69-CHALL | Classical CRE V-Belts

Challenge AX69-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 69 inches (1753mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1803
Pitch Length (mm): 1783
Inside Length (mm): 1753
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.71(ex VAT)

AX60-CHALL | Classical CRE V-Belts

Challenge AX60-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 60 inches (1524mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1574
Pitch Length (mm): 1554
Inside Length (mm): 1524
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.72(ex VAT)

BX43-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard BX43-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 17x1092Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1162
Pitch Length (mm): 1132
Inside Length (mm): 1092
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.73(ex VAT)

AX70-CHALL | Classical CRE V-Belts

AX70-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 70 inches (1778mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1828
Pitch Length (mm): 1808
Inside Length (mm): 1778
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.73(ex VAT)

BX37-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard BX37-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 17x940Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1010
Pitch Length (mm): 980
Inside Length (mm): 940
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.75(ex VAT)

AX61-CHALL | Classical CRE V-Belts

AX61-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 61 inches (1549mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1599
Pitch Length (mm): 1579
Inside Length (mm): 1549
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.84(ex VAT)

AX71-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX71-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1803Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1853
Pitch Length (mm): 1833
Inside Length (mm): 1803
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.89(ex VAT)

AX62-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX62-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1575Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1625
Pitch Length (mm): 1605
Inside Length (mm): 1575
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 6.93(ex VAT)

BX44-CHALL | Classical CRE V-Belts

Challenge BX44-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 44 inches (1118mm) and a BX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1188
Pitch Length (mm): 1158
Inside Length (mm): 1118
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.94(ex VAT)