Classical CRE V-Belts

Loading Results...

BX44-CHALL | Classical CRE V-Belts

Challenge BX44-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 44 inches (1118mm) and a BX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1188
Pitch Length (mm): 1158
Inside Length (mm): 1118
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.94(ex VAT)

BX38-CHALL | Classical CRE V-Belts

Challenge BX38-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 38 inches (965mm) and a BX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1035
Pitch Length (mm): 1005
Inside Length (mm): 965
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 6.99(ex VAT)

AX73-CHALL | Classical CRE V-Belts

AX73-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 73 inches (1854mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1904
Pitch Length (mm): 1884
Inside Length (mm): 1854
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 7.07(ex VAT)

BX45-CHALL | Classical CRE V-Belts

BX45-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 45 inches (1143mm) and a BX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1213
Pitch Length (mm): 1183
Inside Length (mm): 1143
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 7.07(ex VAT)

BX39-CHALL | Classical CRE V-Belts

BX39-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 39 inches (991mm) and a BX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1061
Pitch Length (mm): 1031
Inside Length (mm): 991
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 7.08(ex VAT)

AX63-CHALL | Classical CRE V-Belts

Challenge AX63-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 63 inches (1600mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1650
Pitch Length (mm): 1630
Inside Length (mm): 1600
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 7.08(ex VAT)

AX64-CHALL | Classical CRE V-Belts

AX64-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility.. With an inside length of 64 inches (1626mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions.. They …

Outside Length (mm): 1676
Pitch Length (mm): 1656
Inside Length (mm): 1626
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 7.14(ex VAT)

AX74-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard AX74-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1880Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1930
Pitch Length (mm): 1910
Inside Length (mm): 1880
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 7.18(ex VAT)

AX75-CHALL | Classical CRE V-Belts

Challenge AX75-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 75 inches (1905mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.. If you require additional information please …

Outside Length (mm): 1955
Pitch Length (mm): 1935
Inside Length (mm): 1905
Top Width (mm): 13
Depth (mm): 8
Temperature Range: '-30˚C to +80˚C

£ 7.25(ex VAT)

BX46-CHALL | Classical CRE V-Belts

V-Belts for industrial use are designated both to RMA standard BX46-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 17x1168Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Outside Length (mm): 1238
Pitch Length (mm): 1208
Inside Length (mm): 1168
Top Width (mm): 17
Depth (mm): 11
Temperature Range: '-30˚C to +80˚C

£ 7.25(ex VAT)